Stillage Details


	Hinckley & Bosworth Branch

Hinckley & Bosworth CAMRA Beer Stillage

The stillage was professionally constructed in 2008 for our first beer festival. It is solidly made using welded steel sections & fits easily together using high tensile nuts & bolts. It can be assembled in a few minutes by four people.

It will hold a maximum of 60 x 9 gallon casks plus a smaller end bay suitable for ciders etc.

There are 4 equal sized bays (at 2.3m centres) each holding 15 casks, in three rows – the bays can be assembled individually or in any combination; so if you only require stillage for 30 casks, two bays will be enough.

It can be assembled to take 18 gallon casks, if required - recommended for bottom row only.

We may be prepared to hire this stillage (complete or in part) to local CAMRA festivals. If you are interested please contact Geoff Targett on 01455 611978 or click here to e-mail

Click on image to see larger view:


General View - Cider bay at far end	A single bay	Closer - showing assembly details & chocking	Even closer	Single bay showing construction

General view - 3 bays fully laden	Using the ramp to position a barrel on the top row	The bare bones of it	It doesn't take up much room when disassembled	The cider bay

top

CAMRA
Web Site

The views expressed on this site are not necessarily those of the Campaign for Real Ale (CAMRA) Ltd, or of the members of the Hinckley & Bosworth Branch.
Whilst a lot of effort is made to ensure that the information on this site is accurate and up to date, no responsibility for errors and omissions is accepted.
Links to external servers do not imply any official or unofficial CAMRA, the Hinckley & Bosworth Branch or any web master's endorsement of the opinions, content or ideas expressed therein, or guarantee the validity, accuracy, timeliness or legality of any of the information provided. Links to commercial sites are in no way an endorsement of any vendor's products or services.

Found a dead link?
e-mail the Webmaster